GE Profile 200D8074P017 Скачать руководство пользователя

Страница: 5 / 132

Consumer Support

oubleshooting T

ips

Operating Instructions

Safety Instructions

Installation Instructions

About the temperature controls.

ge.com

NOTE:

The refrigerator is shipped with protective film covering the temperature controls. If this film was not

removed during installation, remove it now.

The temperature controls are preset in the factory at

37°F

(

3°C)

for the

refrigerator compartment and

0°F

(

-18°C)

for the freezer compartment.

Allow 24 hours for the temperature to stabilize to the preset
recommended settings.
Refrigerator temperatures can be adjusted between 34°F and 44°F
(1°C to 7°C), and the freezer temperatures can be adjusted between
–6°F and +6°F (–21°C to –14°C).

To change the Refrigerator temperature:
LCD Models:
Access By:

Home > Refrigerator

Activate By:

Using the arrows to select the desired

temperature. You must press

ENTER

to set the new

temperature.

To change the Freezer temperature:
Access By:

Home > Freezer

Activate By:

Using the arrows to select the desired

temperature. You must press

ENTER

to set the new

temperature.
Once the desired temperature has been set, the display will
return to the

HOME

screen and show the set temperatures

underneath the actual temperature display for several
seconds. Several adjustments may be required. Each time
you adjust the controls, allow 24 hours for the refrigerator
to reach the temperature you have set.

Non-LCD Models:

To change the temperature, press and release the

WARMER

COLDER

pad. The

SET

light will come on and the display

will show the set temperature. To change the temperature,
tap either the

WARMER

COLDER

pad until the desired

temperature is displayed.
Once the desired temperature has been set, the
temperature display will return to the actual refrigerator
and freezer temperatures after 5 seconds. Several
adjustments may be required. Each time you adjust the
controls, allow 24 hours for the refrigerator to reach the
temperature you have set.

The temperature controls can display both the

SET

temperature as well

as the actual temperature in the refrigerator and freezer. The actual
temperature may vary slightly from the

SET

temperature based on

usage and operating environment.

Turning the cooling system off:
LCD models:

Turning the

cooling system OFF

stops cooling in both the

freezer and refrigerator compartments, but does not shut off electrical
power to the refrigerator.

Non-LCD models:

Setting either or both controls to

OFF

stops cooling in

both the freezer and refrigerator compartments, but does not shut off
electrical power to the refrigerator.

LCD Models:
Access By:

Home > Options > Information and Settings >

Cooling System Off
To turn the cooling system back on, press the touch screen
and press the

button.

Activate By:

Pressing

ENTER.

Non-LCD Models:

Tap the

WARMER

pad for either the refrigerator or the

freezer until the display shows

OFF

To turn the unit back on,

press the

COLDER

pad for either the refrigerator or freezer.

The

SET

light will illuminate on the side you selected. Then

press the

COLDER

pad again (on the side where the

SET

light is illuminated) and it will go to the preset points of 0°F
(–18°C) for the freezer and 37°F (3°C) for the refrigerator.
When the unit is turned back on, it will take up to 24 hours
to stabilize.

The Performance Air-Flow System is designed to maximize
temperature control in the refrigerator and freezer
compartments. This unique special feature consists of the
Air Tower along the back wall of the refrigerator and the
Air Tunnel on the bottom portion of the freezer rear wall.
Placing food in front of the louvers on these components

will not affect performance. Although the Air Tower and
the Air Tunnel can be removed, doing so will affect
temperature performance. (For removal instructions,
on-line, 24 hours a day, contact us at ge.com or call
800.GE.CARES. In Canada, contact us at geappliances.ca
or call 1.800.361.3400.)

Performance Air Flow System

LCD models

Non-LCD models

On LCD
models

Not all features are on all models. Your controls will look like one of the following