Installation Instructions
REMOVING THE FREEZER DRAWERS
(cont.)
REMOVE THE UPPER BASKET
Open the bottom freezer drawer until it stops.
Pull the basket out to the stop location.
Lift the basket up at the front to release it from
the slides.
Lift the back up and out of the slide.
REMOVE THE LOWER BASKET
Open the bottom freezer drawer until it stops.
Lift the rear of the basket up so the two rear
alignment tabs are pulled out of the slide bracket.
Rotate the basket up and out of the drawer.
1
A
C
D
REMOVE THE BASE GRILLE
(if needed)
If, after removing the freezer drawers and
refrigerator door, the refrigerator will still not fit
through a doorway, the base grille can be
removed.
Remove the base grille by removing the
2 Phillips-head screws.
3
The freezer drawers can be removed, if needed, to
fit through tight areas.
Read these instructions completely and carefully.
REMOVE THE DRAWER FRONT FROM
THE SLIDES
Remove the 10 hex head screws from the door
and remove the door.
Set the drawer front on a non-scratching
surface.
Push the rail assemblies back into the cabinet.
2
A
A
A
B
C
B
24
BOTTOM DRAWER
A
C
B