LEVEL THE REFRIGERATOR
The leveling legs have 2 purposes:
1)
Leveling legs adjust so the refrigerator is
firmly positioned on the floor and does not
wobble.
2)
Leveling legs serve as a stabilizing brake to
hold the refrigerator securely in position
during operation and cleaning. The leveling
legs also prevent the refrigerator from
tipping.
Remove the grille by removing the two Phillips-
head screws.
Turn the leveling legs
clockwise to raise
the
refrigerator,
counterclockwise to lower
it.
CAUTION:
To avoid possible
personal injury or property damage, the
leveling legs must be firmly touching
the floor.
Replace the base grille by inserting the two
Phillips-head screws.
10
A
Installation Instructions
22
SET THE CONTROLS
Set the controls to the recommended setting.
11
H
OME
H
ELP
L
OCK
Hold for 3 Seconds
to activate Lock
T
URBO
C
OOL
E
NERGY
S
AVER
D
OOR
A
LARM
F
REEZER
F
0
R
EFRIGERATOR
F
37
O
PTIONS
P
RECISE
F
ILL
E
NERGY
S
AVER
ON
REMOVE PACKAGING
START ICEMAKER
(icemaker models)
A)
Remove all tape, foam and protective
packing from shelves and drawers.
B)
Remove the tie downs from the freezer
baskets.
Set the icemaker power switch to the
I (on)
position. The icemaker will not begin to operate
until it reaches its operating temperature of
15°F (–9°C) or below. It will then begin operation
automatically. It will take 2–3 days to fill the
ice bin.
NOTE:
In lower water pressure conditions, the water
valve may turn on up to 3 times to deliver
enough water to the icemaker.
12
Power
switch
INSTALLING THE REFRIGERATOR
(cont.)
B
C
