– 69 –
Turbo Freeze and Turbo Cool
Note:
Select Turbo Freeze or Turbo Cool separately. When Turbo Freeze or Turbo Cool is selected, the set
temperatures in the freezer and refrigerator are not changed. The set temperatures for the compartments
can be changed while these functions are in use.
Turbo Freeze Function
To select or cancel Turbo Freeze, press and hold the ADJUST FREEZER pad for 3 seconds.
When you select Turbo Freeze, the LED indicator is displayed immediately, but there is 10 seconds lag time
to engage the actual operation. When Turbo Freeze is cancelled, the Turbo Freeze function stops and the
indicator turns off immediately. When selected, both the compressor and the freezer fan run for 2.5 hours
continuously. After 2.5 hours has elapsed or if Turbo Freeze has been cancelled, the indicator goes off and
the freezer set temperature will be restored.
Turbo Cool Function
To select or cancel Turbo Cool, press and hold the ADJUST REFRIGERATOR pad for 3 seconds. The operation
of Turbo Cool is the same as Turbo Freeze with the following exception: When Turbo Cool is selected, the
compressor and refrigerator fan will operate until the refrigerator temp reaches 25°F (-3.9°C), or if 2½ hours
expires. At this point, the cycle will be terminated.
Note
When Turbo Freeze and Turbo Cool are selected to operate at the same time, the compressor and freezer
•
fan run continuously and the refrigerator fan runs until 25°F (-3.9°C) is reached in the refrigerator.
If Turbo Freeze is selected when the freezer and the refrigerator temperatures are higher than 14°F
•
(-10°C) and 50°F (10°C), respectively, the refrigerator fan will be off. If Turbo Cool is selected, then the
freezer fan will be off. When both functions are selected, there is no bene
fi
t of fast cooling for either
compartment.
