GE PCVH480EKWW Series, Руководство по обслуживанию, Страница: 52 / 53

Service Test Mode (cont.)
ERROR
CODE
COMPONENT,
SYSTEM, OR TEST
DESCRIPTION & CORRECTIVE ACTION
E00 No error There are no errors to display.
tS Thermistor short Thermistor voltage is over 4.8 VDC for more than 5 seconds. Check the PCB,
wire, and thermistor.
t0 Thermistor open Thermistor voltage is under 0.2 VDC for more than 5 seconds. Check the PCB,
wire, and thermistor.
dE Door switch fail Door interrupt voltage is continuously low level. Check the PCB.
od Over dry The time of dry process & cooling process is over 240 minutes. Check the PCB.
HE Heating error Heating temperature is over 75 degrees Celsius for more than 10 seconds.
Check the PCB.
FE Power frequency
error Power frequency is 50 Hz for more than 15 seconds. Check the power frequency
and PCB.
bE2 Button error When the button is continuously pressed for more the 30 seconds. Check the
button and PCB.
3E1 Motor relay open When the motor should be running, the control detects the higher motor signal
within the 60 seconds. Check the PCB, wire, and motor.
3E2 Motor relay stuck When the motor state is stop, the control detects the zero cross motor signal
within the 60 seconds, Check the PCB, wire, and motor
52