GE PACSystems IC695CPU3104, Руководство пользователя

Страница: 15 / 32

Batteries
GFK-2741D June 2015 9
2.5
Rechargeable Batteries
2.5.1 IC690RBT001
The IC690RBT001 Rechargeable Battery provides an extended backup time for volatile memory on PACSystems
CPUs compared to that of the standard memory backup battery (IC698ACC701).
2.5.1.1 Specifications
Parameter Specification
Battery capacity 7.0 Amp-hours
Battery construction 3-cell, nickel-metal hydride
Lithium content None
Physical dimensions 6.902” long x 3.150” wide x 1.819” high (175.3 x 80.0 x 46.2 mm)
Case material Black, flame-retardant ABS plastic
Connection 2’ (60cm) twisted red/black 22 AWG (0.326mm 2 ) cable with female two-pin connector
compatible with the battery connector on PACSystems CPUs.
Operating temperature range 0 to +50ºC
Nominal shelf life 3 years@ 20ºC
Operating life @ 50ºC 12 months or 60 charge-discharge cycles
Compatible Charger IC690CRG001
2.5.1.2 Nominal Battery Life
The nominal battery life at 50ºC is 12 months or 60 charge/discharge cycles. Battery life is negatively affected by
higher temperatures, and can be significantly improved by operating closer to room temperature (25ºC). When
deciding where to mount the battery, consider how the mounting location will affect the battery temperature. For
most industrial installations, mounting the battery below the PLC rack will result in a temperature closer to 25ºC
and will help improve battery life. Do not operate the battery at less than 0ºC or greater than 50ºC.
The battery will continue to operate after 12 months or 60 charge/discharge cycles, however the battery capacity
will decline and the times listed in the
Battery Compatibility and Memory Retention Time in Days at 20°C chart will no
longer be valid.
2.5.1.3 Battery Mounting
With power removed from the equipment, drill four #29 (0.136”) (3.45mm) holes in the panel mounting surface, and
tap for #8-32 threads, according to the hole pattern shown in the following figure. Use care to keep metal chips
from falling into other equipment. Securely attach the rechargeable battery module to the panel mounting surface
using four #8-32 x ½” (M4x0.7x12mm) flat head machine screws.
6.435"
(
163.45 mm)
2.250" (57.15 mm)
#8-32 (four places)