GE OPAL01GEPKT, Руководство пользователя

Страница: 7 / 38

49-1000418 Rev. 6
7
CARE AND
CLEANING
To keep your nugget ice tasting fresh and your Opal
looking great, we recommend cleaning/sanitizing your
Opal at least once per week.
To clean the exterior of the ice maker, unplug the
product, then use a soft cloth dampened with soapy
water to gently clean the exterior surfaces. Dry with a
soft cloth.
The exterior stainless steel surfaces can be cleaned
with commercially available stainless steel cleaner. Use
only a liquid cleaner free of grit and rub in the direction
of the brush lines with a damp, soft sponge. Do not use
appliance wax, polish, solvents, or chemicals on the
stainless steel. Do not use soap to clean the reservoir.
Use a soft cloth moistened with water.
WARNING
Chemical Exposure Hazard, when
cleaning with bleach, use bleach in a well ventilated area
and avoid mixing bleach with other household cleaners.
WARNING
Unplug the product before cleaning by
hand, and when not in use.
System Cleaning / Sanitizing Procedure
To clean Opal's internal components, complete the
following steps:
1. Unplug Opal.
2. Remove water filter (if present), and replace with the
reservoir's screened intake cap.
See Figure 1.
3. Drain Opal (see page 8 for detailed instructions).
4. Plug in Opal and slide the rear switch to the "clean"
position.
See figure 2.
5. The display ring will light up yellow and pulse.
See figure 3.
NOTE:
Do not use soap to clean the water reservoir.
6. Create a solution of five cups of water and one
tsp household bleach. Skip to page 8 for further
instructions on how to remove hard mineral deposits.
7. Pour solution into water reservoir.
See figure 4.
Care and Cleaning
Figure 3
Figure 2
Figure 1
Figure 4
Water
Reservoir
Fill Line
Cleaning
Ice