GE NetworX NX-1600E Series, Руководство пользователя, Страница: 14 / 20

NX-1600E LCD Keypad
12
VIEW ALARM MEMORY
Step 1 Press
r 3
. The zone(s) that created the last alarm will be
displayed on the keypad.
Step 2
The ALARM MEMORY feature will flash those zones that created
alarms and will light steady those zones that were bypassed during
the last alarm.
TEST FUNCTION – Optional
If programmed, this function will perform a battery test, communicator test, and/or
a siren test. No alarms will be sent and no reports will be sent unless a
communicator test is performed, at which time a test signal will be sent.
Step 1 Press
r 4
. The test will be performed as programmed.
Step 2
If the siren test is performed, enter a user code to silence the siren.
RESET FUNCTION
This function is used to reset Smoke Detectors, Zone Troubles, and Zone
Tampers.
Step 1 Disarm the system if not disarmed.
Step 2 Press
r 7
. Resets have now been performed.
Step 3
If the keypad begins beeping, the reset did not execute properly.
Enter your code to silence the keypad. Wait a few minutes and
repeat step 2 to attempt another reset. If the keypad still beeps after
repeated attempts, please contact your installer.
SET SYSTEM DATE
Step 1 Press
r 9 6
.
Step 2
Enter the “Master Code”.
Step 3
Enter the “Day of Week “
1 = Sunday
3 = Tuesday 5 = Thursday 7 = Saturday
2 = Monday 4 = Wednesday 6 = Friday
Step 4
Enter the “Month Code”. Must always be two (2) digits.
01 = January
05 = May 09 = September
02 = February 06 = June 10 = October
03 = March 07 = July 11 = November
04 = April 08 = August 12 = December