GE NetworX NX-1600E Series, Руководство пользователя, Страница: 13 / 20

NX-1600E LED Keypad
11
LIGHT PARTITIONS ASSIGNED
1
Partition 1
2 Partition 2
3 Partition 3
4
Partition 4
5 Partition 5
6 Partition 6
7
Partition 7
8 Partition 8
Step 8 When the partitions are assigned, press
r
. This returns you to Step
3 previously mentioned. At this point you may enter another user
number to assign authority level. Repeat Steps 4 - 8 until you have
assigned authority levels to all user numbers.
Step 9 Press
#
to exit the Assigning Authority Level Program.
OTHER KEYPAD FUNCTIONS
SETTING THE KEYPAD TONE
Step 1 Press
r 0
. Keypad is now in the “Adjust Tone” mode.
Step 2
Press
1
to make the keypad sounder go to higher tones.
Press
2
to make the keypad sounder go to lower tones.
Step 3 When the desired tone is reached, press
#
to set this tone and exit
from the “Adjust Tone” mode.
CHANGE PARTITION – Optional
Step 1 Press
r 1
.
Step 2
Press a NUMBER key between 1 and 8 to change partitions
momentarily.
Step 3
If no other key is pressed, it will go back to its standard partition in
ten seconds.
Step 4
If another key is pressed, the system will remain in the new partition
until no keys have been pressed for 60 seconds.