g
EV Charging Station
User Manual & Installation Instructions
GE EV Charging Station User Manual
66 of 86
9.
In the EVSE configuration page modify settings as required.
The correct settings depend on the chosen network architecture and are described in a later
chapter in detail.
There are 3 options for configuration:
No RFID Authentication (default)
RFID authentication in standalone network (see later chapter)
RFID authentication in firewalled network (see later chapter)
After the desired settings were configured click on “Save”. The following page will load:
Figure 64: Configuration Server Confirmation Page
10.
Close the browser page and remove power to the EVSE controller.
11.
Change the position of the S6 Dip-switch back to:
Switch 8-
Closed (Normal operation)
Keep the other switches in their previous positions.
This Dip-Switch configuration will enable the normal operation of the EVSE controller after powered
up.
