GE N60 UR Series, Инструкция по эксплуатации

Страница: 465 / 500

GE Multilin N60 Network Stability and Synchrophasor Measurement System D-1
APPENDIX D D.1 IEC 60870-5-104 PROTOCOL
D
APPENDIX D IEC 60870-5-104 COMMS.D.1IEC 60870-5-104 PROTOCOL D.1.1 INTEROPERABILITY DOCUMENT
This document is adapted from the IEC 60870-5-104 standard. For ths section the boxes indicate the following:
4
– used in
standard direction; – not used;
„
– cannot be selected in IEC 60870-5-104 standard.
1. SYSTEM OR DEVICE:
System Definition
Controlling Station Definition (Master)
4
Controlled Station Definition (Slave)
2. NETWORK CONFIGURATION:
„
Point-to-Point
„
Multipoint
„
Multiple Point-to-Point
„
Multipoint Star
3. PHYSICAL LAYER
Transmission Speed (control direction):
Transmission Speed (monitor direction):
4. LINK LAYER
Unbalanced Interchange
Circuit V.24/V.28 Standard: Unbalanced Interchange
Circuit V.24/V.28 Recommended
if >1200 bits/s: Balanced Interchange Circuit
X.24/X.27:
„
100 bits/sec.
„
200 bits/sec.
„
300 bits/sec.
„
600 bits/sec.
„
1200 bits/sec.
„
2400 bits/sec.
„
4800 bits/sec.
„
9600 bits/sec.
„
2400 bits/sec.
„
4800 bits/sec.
„
9600 bits/sec.
„
19200 bits/sec.
„
38400 bits/sec.
„
56000 bits/sec.
„
64000 bits/sec.
Unbalanced Interchange
Circuit V.24/V.28 Standard: Unbalanced Interchange
Circuit V.24/V.28 Recommended
if >1200 bits/s: Balanced Interchange Circuit
X.24/X.27:
„
100 bits/sec.
„
200 bits/sec.
„
300 bits/sec.
„
600 bits/sec.
„
1200 bits/sec.
„
2400 bits/sec.
„
4800 bits/sec.
„
9600 bits/sec.
„
2400 bits/sec.
„
4800 bits/sec.
„
9600 bits/sec.
„
19200 bits/sec.
„
38400 bits/sec.
„
56000 bits/sec.
„
64000 bits/sec.
Link Transmission Procedure: Address Field of the Link:
„
Balanced Transmision
„
Unbalanced Transmission
„
Not Present (Balanced Transmission Only)
„
One Octet
„
Two Octets
„
Structured
„
Unstructured
Frame Length (maximum length, number of octets): Not selectable in companion IEC 60870-5-104 standard