GE MTS18GT, Руководство пользователя и инструкции по установке

Страница: 4 / 16

The controls are shown below:
Refrigerator Control
When first powered all lights are illuminated for 3 seconds .The factory setting 3 is displayed after 3
seconds.
Change setting by pressing SET key, each time you press it will advance by 1. Press until the desired
setting is achieved. Adjust controls one increment at a time to determine your preferred setting. Allow
12 hours after each adjustment for the refrigerator reach the temperature you have set. Setting 1 is the
warmest 5 is the coldest.
Standby Mode
When the refrigerator is in ON, Press SET for 3 seconds the refrigerator will go into standby mode, the
standby indicator light will be on.
Standby setting will stop cooling in both the refrigerator and freezer compartments but does not shut
off electrical power to the refrigerator.
Revert to normal operation by pressing the SET button ,the standby light will go off, it will go back to the
last setting.
Malfunction Indicator
Light 1&2 lit Refrigerator temperature sensor
Light 1&3 lit Freezer defrost sensor
Light 1&4 lit Ambient temperature sensor
COLD
SET
COLDEST
STANDBY
Hold SET-button for 3-sce
for standby
Temperature
Control