manualshive.com logo in svg

GE MONOGRAM ZV800BJBB, Техническое обслуживание руководство, Страница: 8 / 22

Поделиться
Скачать
GE MONOGRAM ZV800BJBB Скачать руководство пользователя страница 8

– 8 –

Control Features

Glass Visor

The push-button assembly is located in the visor  
and selects the light and fan operations.

Hood Lights Selections:

1

 -  Light ON/OFF. Remembers the last light level 

used. (Six light levels.)

2

 -  Dims the light.

3

 -  Brightens the light.

Hood Fan Selections:

4

 - FAN ON/OFF. Remembers the last fan speed 

used. (Four speed fan.) 

5

 -  Decreases speed.

6

 -  Increases speed.

7

 -  BOOST – The highest fan speed. 

Note: 

The BOOST fan speed can only be selected 

with this control. BOOST is not accessible by cycling 
up to the highest fan speed using the increase fan 
button.

8

 -  Fan indicator light. The light glows when the fan 

is operating.          

Grasp the visor and pull it out to remove steam 
more effi ciently when cooking. Push it back when 
not in use. The vent fan and lights work with the 
visor in or out.

Cleaning

To preserve and protect the fi ne fi nish, regularly 
clean and polish the stainless steel exterior and 
visor with a commercially available stainless steel 
cleaner, such as Stainless Steel Magic™. Stainless 
Steel Magic™ is available through GE Parts and 
Accessories, 800.626.2002 or GE Appliances.com. 
Order part number WX10X15. 

To avoid damaging the stainless steel, wipe in 
the same direction as the grain when polishing or 
cleaning any stainless steel surface. Do not use 
appliance wax or polish on the stainless steel. 
Warranty does not cover damage due to improper 
cleaning methods.

FAN

LIGHT

BOOST

8

7

6

5

4

3

2

1

Light Controls

Fan Controls

Push-Button Controls

Содержание MONOGRAM ZV800BJBB























Отзывы:

Нет отзывов