GE Monogram ZICP720, Руководство по установке

Страница: 12 / 20

12
Installation Instructions
SECURE REFRIGERATOR TO CABINETRY
Whenever possible, perform this step for anti-tip
security, or when anti-tip brackets cannot be used.
The refrigerator must be secured to prevent tipping .
• Drill hole in trim and drive screw through the trim
into adjacent cabinet.
• Follow the same procedure on the opposite side.
9
ALTERNATE ANTI-TIP PROCEDURE
The refrigerator must be secured to prevent tipping .
The anti-tip brackets cannot be used on metal
wall studs. Use this Alternate Procedure to secure
the refrigerator against tip-over whenever metal wall
studs are encountered and there is a soffit.
• Use a 3/16
″
bit to drill eight evenly spaced clearance
holes through the metal top case trim.
• Use a 1/16
″
bit to drill pilot holes through the metal
clearance holes and into the wood soffit. The holes
should be centered in the soffit or a 3/4
″
min. wood
brace. The brace spanning the enclosure must be
securely fastened to cabinets on both sides.
• Install eight (4 on each refrigerator) 1-1/2
″
drywall
screws into the pilot holes.
8
Top Case Trim
Install Eight 1-1/2
″
Drywall Screws Through Trim
and Into Soffit or 3/4
″
Min. Wood Brace
3/4
″
Min.
Side View
Top Case Trim
Drive Screws Through Case Trim
and Into Adjacent Cabinets
Top Case Trim
INSTALL GRILLE PANEL
TWO PEOPLE ARE REQUIRED TO INSTALL
THE GRILLE PANEL.
• Push all four hinges on the grille panel (F) to the
open position.
• Hold the unified grille panel against the left side of the
opening. Drive 2 screws through the hinge and into the
support bracket. Install the right side hinge. Then install
the center hinges.
• Grasp grille panel at the center and pull down to close.
The panel should align evenly with the beveled side
of the door.
NOTE: To adjust the grille panel backward or forward,
loosen the 2 attachment screws on all 4 hinges. Slide
the grille panel outward or to the back. Tighten the screws.
10
Install 2
screws
Grille Panel