GE Monogram ZGU365, Руководство по установке

Страница: 5 / 24

5
Cut the
Opening
Cabinetry/Ductwork
G a s Downdraf t Cookto p
Measure carefully when cutting countertop.
Make sure sides of opening are parallel and
rear and front cuts are exactly perpendicular
to sides.
• The Monogram gas downdraft cooktop is
designed to fit in a 36" or larger base
cabinet.
• The countertop cutout for the cooktop
must be:
– 34-1/2" at the front of the counter and,
– 34" at the back
– 18-1/8" front to back notch
– 20-11/16" front to back of cutout
The notches at the back of the cutout are:
– 2-9/16" forward and 1/4" to the inside.
Follow the illustration shown.
• Allow at least 4-5/8" clearance between back
of cutout and combustible wall.
• Allow at least 8-13/16" clearance from right
and left sides of cutout to adjacent wall.
• Allow at least 2-1/4" clearance between front
of cutout and front edge of countertop.
Caution:
Wall coverings,
countertops and cabinets
should withstand 200
°
F heat
generated by the cooktop.
Tools and
Materials
Required
• Carpenter’s square
• Pipe wrench
• Manual gas line
shut-off valve
• 3/4" NPT x 3/4"
I.D. or 1/2" NPT x
1/2" I.D. flare
union adaptor for
connection to
supply line
•Duct work to suit the
installation
• 1/2" NPT x 3/4"
I.D. or 1/2" I.D.
flare union adaptor
for connection to
regulator
• Gas-resistant pipe
joint sealant
• Self-adhesive gasket
(supplied)
• Two clamping
brackets and
screws (supplied)
• Gas pressure
regulator (supplied)
• Large flat-blade
screwdriver
• Saw
• 5 foot AGA-certified
flexible metal
appliance connec-
tor, 3/4" or 1/2"
I.D. to match gas
supply line:
– If required by local
codes, use solid
pipe with fittings.
Note: Purchase new
flexible line, DO
NOT USE OLD,
PREVIOUSLY USED
FLEXIBLE LINE.
Top View–Countertop Surface
2-1/4" Min. Clearance to Cutout
34-1/2"
Cooktop Area Cutout
3/4" Cooktop Overlap
Front Edge of Countertop
20-11/16"
Cutout
Depth
18-1/8"
Cooktop
Cutout
Depth
2-9/16"
1/4"
34" Vent Cutout
1/4" Overlap
21-3/4"
Total Flat
Surface
Required
1/8" Gap
36"
1/4"
4-5/8" Cooktop
Cutout to
Rear Vertical
Combustible
Surface
8-13/16" Min. Cutout
to Wall Both Sides