GE Moffat MCP2024DXBB, Руководство по установке

Страница: 3 / 28

3
Installation Instructions
13" (33 cm)
Depth of
unprotected
overhead
cabinets.
CUTOUT
WIDTH
24" (60 cm)
A
22 5/8"
(57.4 cm)
22 13/16"
(58.0 cm)
19-1/4"
(49.0 cm)
19-9/16"
(49.7 cm)
B C
24"
(60 cm) min.
D E F G
18" (45.7 cm)
min. Height
from
countertop to
nearest cabinet
on either side
of unit. 30" (76.2 cm)
min. (see
note*)
Clearance from
countertop to
unprotected
overhead
surface. 2" (5 cm) min.
Clearance from
cutout to side
wall on the left
and right of the
unit.
IMPORTANT
Under the cooktop it is necessary to install a partition as
shown in figure 2-3.
*NOTE: 24" (61 cm) min. clearance if bottom of wood or
metal cabinets is protected by not less than 1/4" (0.6 cm)
flame retardant millboard covered with no less than No. 28
MSG sheet steel 0.015" (0.04 cm) stainless steel, or 0.024"
(0.06 cm) aluminum or 0.020" (0.05cm) copper. 30" (76.2
cm) min. clearance between top of cooking platform and
bottom of unprotected wood or metal cabinet.
Important preparation suggestions
1. Chamfer all exposed edges of decorative laminate to
prevent damage from chipping.
2. Radius corners of cutout and file to insure smooth
edges and prevent corner cracking. Recommend 1/4"
or 3/8" diameter drill in each corner.
3. Rough edges, inside corners which have not been
rounded and forced fits can contribute to cracking of the
countertop laminate.
This cooktop has been designed with wide tolerances
of cut-out to cover possible replacement with other
brands. We recommend to that you consider the
minimum dimension of cutout size In the case of new
installation.
Some cut out sizes for possible replacements:
Inches
22 13/16" x 19-9/16"
Dimension
24"
cm
58,0 x 49,7