GE Mini Field Agent, Инструкции по установке и настройке

Страница: 36 / 40

Appendix 2
Verification of MFA logs
After performing a case, Verify the MFA logs with the following steps.
1. Using putty, login to the MFA and enter the below command:
tail -f /root/PredixMachine/logs/machine.log
AB.26p.107
2. If any error messages are displayed similar to the above
screenshot, then there is a connectivity issue between the MFA
to the Cloud network. Verify the following steps:
• LAN Port 1 of the Mini Field Agent is connected to the
facility network switch, using an ethernet cable. See
"
Preparing Mini Field Agent for Boot Up ".
• See " Configure Router ACL Settings ".
• See steps from " Configuring Facility IP Address " to
" Rebooting Mini Field Agent ".
• See " Starting the Anesthesia Machine ".
3. Repeat step 1 and ensure that there are no error messages as
shown in the below screenshot:
AC.26p.106
36
2094532-001 D 02 2018