MDS 05-4846A01, Rev. F
SD Series Technical Manual
65
7 character bits, odd parity, 1 stop bit
7 character bits, odd parity, 2 stop bits
7 character bits, even parity, 1 stop bit
7 character bits, even parity, 2 stop bits
•
Buffer
—The transceiver’s buffer provides a way of handling data
“over-runs,” where more data is passing through the
COM2
port
than can be immediately handled by the unit. When the buffer is
on, any such data is stored up and processed in the appropriate
order. Available selections are
Data Handling ON
or
Data Handling
OFF
.
•
Device
—This setting controls the device behavior of x710 legacy
radios. It does not apply to packet or Ethernet radios, and may be
disregarded for these models.
•
Talk on/Listen to
—Any combination of the three Virtual Radio
Channels may be entered in these fields. For more information on
how these settings are used, refer to the
SD Serial/Telnet Manage-
ment Supplement
, Part No. 05-6193A01 more information.
•
Term Srvr Status
—Indicates whether the radio’s terminal server is
enabled or disabled.
IP Configuration
The IP Configuration screens contain various settings for the IP data
stream. Each item is listed below along with an explanation of the
parameter. Note that the bottom of the screen displays the
current set-
tings
that have been applied to the radio in a read-only fashion.
