GE MDS SD Series, Справочное руководство, Страница: 131 / 148

MDS 05-4846A01, Rev. C SD Series Ref. Manual (Packet & Transparent Mode) 123
FEATURES
—Shows presently authorized features
key
=<string>—Authorization key
BRIDGE
Used to turn bridging on or off and specify bridge behavior. Optional
arguments as follows:
MODE=<choices>
—Current bridge mode.
OFF
—Bridge is OFF.
ON
—Bridge is ON.
BASICFILTER=<choices>
—Basic Bridge Filter Selection.
ALL
—Broadcast/Unicast (All)
ARP
—Unicast and ARP
UNICAST
—Unicast Only
ADVFILTER=<choices>
—Adv Bridge Filter Status.
OFF
—Adv Src Addr Filter is OFF
ON
—Adv Src Addr Filter is ON
SRCADDR=<string>
—Adv Src Addr Filter Val
CMD=<0|1>
—Dump command line format
COM1 View/Configure
COM1
port settings. Optional arguments as follows:
DEFMODE=<mode>
—Sets or displays the
COM1
port default mode on
startup. Cannot be set to
DATA
unless the device has been authorized for
serial payload.
CONSOLE
:
COM1
defaults to console (management) mode.
DATA
:
COM1
defaults to transparent data mode.
DATA=<choices>
—Current operating mode.
OFF
—Console (management) mode.
ON
—Payload data mode.
BAUD=<bps>
—Sets or displays the baud rate setting as
300
(available
only in data mode),
1200
,
2400
,
4800
,
9600
,
19200
,
38400
,
57600
, or
115200
bps.
FORMAT=<choices>
—Sets or displays the
COM1
port data characters,
parity, and stop bits setting. Valid data parameters are:
7N1
—seven char bits, no parity, one stop bit
7N2
—seven char bits, no parity, two stop bits
7O1
—seven char bits, odd parity, one stop bit
7O2
— seven char bits, odd parity, two stop bits
7E1
—seven char bits, even parity, one stop bit
7E2
—seven char bits, even parity, two stop bits