3
6
Open RC or LRC PSU box cover, disconnect AC conduit. Remove AC conduit wire from PSU box knockout hole using
flat head screw driver.
Screwdriver tip
Remove cover
AC conduit
Remove
AC wires
7
Insert AC line wires into the PSU box through
the knockout hole and connect wires (see wiring
diagrams at right).
AC line (Line, Neutral and Ground)
RC Wiring Diagram
DRIVER
TPC
Black (+) Lead
White (-) Lead
Black (+) Lead
L N G
PSU Enclosure
*Blue/Red (+) Lead
(0-10V) Purple (+) Dimming Lead
(0-10V) Grey (-) Dimming Lead
Blue Lead - 120V ONLY
Red Lead - 277V ONLY
*NOTE:
LRC Wiring Diagram
DRIVER
TPC
Black /Red (+) Lead
White (-) Lead
Black (+) Lead
White (-) Lead
L N G
PSU Enclosure
Blue (+) Lead
(0-10V) Purple (+) Dimming Lead
(0-10V) Grey (-) Dimming Lead
Black Lead - 120V ONLY
Red Lead - 277V ONLY
*NOTE:
Through Wiring for RC-series 15A Circuit
Lumen Level
Maximum Number of Fixtures
(120V Input / 277V Input)
1000
84 / 195
1500
77 / 179
2000
59 / 138
3000
38 / 89
4000
24 / 57
Minimum Spacing Requirements
for all Fixture Configurations
Center to center of adjacent luminaires
24”
Top of Luminaire to overhead building member
3”
Luminaire center to side building member
12”
(For any other information refer to RC-series or LRC-series Installation Guides)
RC/LRC-Series Mounting
(RX-Series Mounting skip to step 15. LRXR-Series Mounting skip to step 18)