Table 1: Light Bar Retrofit Kit Contents
Item
Quantity
Lens assembly
1
Light engines assembly
1
Retrofit kit accessory bag
1
Mounting brackets
2 or 3
Drill point screws
5
T8/T5 socket hole cover
4 or 8
T8 HO socket hole covers
0, 4 or 8
5/16” white plastic bushing
1
White wire 18 AWG 1.5” / 4cm
3
White wire 18 AWG 23.6” / 60cm**
0 or 1
Black wire 18 AWG 23.6” / 60cm**
0 or 1
Green-yellow wire 18 AWG 23.6” / 60cm**
0 or 1
Red wire 18 AWG 23.6” / 60cm**
0 or 1
Blue wire 18 AWG 23.6” / 60cm**
0 or 1
Violet wire 18 AWG 11.8” / 30cm**
0 or 1
Gray wire 18 AWG 11.8” / 30cm**
0 or 1
**Depending on configuration. See Table 2.
Note:
See Table 2 for Light Bar Retrofit Kit components required and required fixture dimensions.
Note:
The assembly of the light engine(s) + lens is called a “light bar”.
Recessed Fixture Retrofitting
Surface Mounted Fixture Retrofitting
Before
Before
After
After
The pictures below show some typical fixtures before and after installation of the Light Bar Retrofit Kit for recessed and
surface mounted applications.
