manualshive.com logo in svg

GE KILSEN KSA700 Series, Руководство пользователя, Страница: 12 / 18

Поделиться
Скачать
GE KILSEN KSA700 Series Скачать руководство пользователя страница 12

 

12 

 

KSA700 Series User Guide 

To re-activate the keyboard a level 2 access password must be entered (see section 2.3 
Access levels and passwords). 

3.2.4.4 Delayed mode 

A time delay can be programmed in any zone for daylight hours or for a specified period 
of the day. It may only be programmed in access level 3 (i.e. by the installer) but can be 
disabled and enabled as required from access level 2.  

Delay modes allow the user to verify the cause of the alarm before outputs (relays and 
sounders) are activated.  

When this option is enabled the corresponding LEDs of the front panel are switched on. 

When the fire panel detects a fire and a delay has been programmed only the fire panel 
internal buzzer is activated. Through the LCD display and corresponding LEDs, the 
system informs the operator about the device that originated the alarm and that the 
system is in the first phase of a delayed alarm. 

By pressing the 

Silence Buzzer

 or 

Mute

 key, the system moves into the second delayed 

alarm phase, normally programmed to be long enough to allow confirmation of the cause 
of the alarm and apply the appropriate corrective actions. 

If the Silence Buzzer key is NOT pressed, the system moves into the confirmed alarm 
mode. 

The fire panel must be 

Reset

 before the programmed delay for phase 2 has expired, else 

the confirmed alarm will be triggered. 

"

 

Manual call points always trigger a confirmed alarm situation as no delay is 
allowed. 

 

When 

Delayed Mode

 is selected, the system asks for the number of days that this delay 

mode should be active. Using the 

Change

 or 

*

 keys enter the required number. Once 

activated, the Delayed Mode LED is switched on. 

"

 

To enable the delay mode permanently, enter 200 days. 

 

3.2.4.5  Relay / Sounders 

This option is useful to check the system without releasing the sounders and outputs. 

Select 

Relay / Sounders

 from the 

Disable Menu

 and select the item to be disabled from 

the following screen.  

 

 

 

 1. 

Sounders  [Enabled] 

 

 

2. Relays 

[Enabled] 

 

 

 

 

 

 

 

An access level password is requested to complete this option and a confirmation screen 
details the event. 

Содержание KILSEN KSA700 Series



















Отзывы:

Нет отзывов