10
KSA700 Series User Guide
LED:
If selected the message
Checking LEDs
is displayed and the fire panel switches the
panel LED indicators on one by one to verify all work properly.
LCD:
If selected the system tests the panel LCD.
Zone:
This option tests outputs (alarms) without requiring a manual reset of the system.
When selected the system asks if outputs should be released. If yes the outputs will be
activated briefly and then silenced automatically.
It is also possible to select which zones to test. To check the outputs from zone 1 to zone
10 enter the following:
Zone
test
From Zone
: [001]
To Zone
: [010]
Release Outputs
: [YES]
The Test LED indicator will be lit and a test screen displayed in the LCD until the test is
completed.
To cancel all tests and / or return to the previous menu press the
#
key.
3.2.3 Time
Updates the system time setting. The default time format is 24 hour.
3.2.4 Enable / Disable
Zones, devices, the keyboard, the delay mode and relays / sounders may all be enabled
or disabled.
To
Enable
an item select
Enable
from the
Main Menu.
The following menu is displayed:
[ENABLE]
[#
Exit]
1. Zone
4. Delayed Mode
2. Devices
5. Relay / Sounders
3. Keyboard
To
Disable
an item select
Disable
from the
Main Menu.
The following menu is displayed:
[DISABLE]
[#
Exit]
1. Zone
4. Delayed Mode
2. Devices
5. Relay / Sounders
3. Keyboard
"
The following procedures apply to both enabling and disabling features of the
system. Choose
Enable
or
Disable
from the
Main Menu
as required.
