GE JVM1665, Руководство по установке

Страница: 18 / 48

Attach the oven to the top cabinet by inserting
3 self-aligning screws through outer top cabinet
holes. Turn two full turns on each screw.
Be sure
to keep power cord tight. Be careful not to pinch
the cord, especially when mounting flush
to bottom of cabinet.
18
Installation Instructions
2 Rotate front of oven up
against cabinet bottom.
1
MOUNT THE OVEN
B6.
FOR EASIER INSTALLATION AND PERSONAL SAFETY, WE
RECOMMEND THAT
TWO PEOPLE INSTALL THIS OVEN.
IMPORTANT: Do not grip or use handle
during installation.
NOTE: If your cabinet is metal, use the nylon grommet
around the power cord hole to prevent cutting
of the cord.
NOTE: We recommend using filler blocks if the
cabinet front hangs below the cabinet bottom shelf.
IMPORTANT: If filler blocks are not used,
case damage may occur from over
tightening screws.
NOTE: When mounting
the oven, thread power
cord through hole in
bottom of top cabinet.
Keep it tight throughout
Steps 1–3. Do not pinch
cord or lift oven by
pulling cord.
Lift oven, tilt it
forward and hook
slots at back bottom
edge onto two lower
tabs of mounting plate.
5
4
Cabinet Front
Cabinet Bottom Shelf
Tighten the three screws to the top
of the oven completely. (While tightening
screws, hold the oven in place against the wall
and the top cabinet.)
Filler Block
Oven Top
Equivalent
to Depth
of Cabinet
Recess
Install grease filters. See the Owner’s Manual
packed with the oven.
Self-Aligning Screw
3