![GE JSP50GN Скачать руководство пользователя страница 38](http://html.mh-extra.com/html/ge/jsp50gn/jsp50gn_use-and-care-manual_2202032038.webp)
Cleaning Guide
NOTE: Let surface/modules/oven parts cool before touching or handling.
PART
Solid Disk Module*
Solid Disk Elements
Radiant Module
Top
Well
Reflector Plates
Jars
riddle Cover
MATERIALS TO USE
●
Hot
●
Sponge
●
Soti Cloth
●
Soap
●
Cleansing Powder
●
Soap-Filled Scouring Pad
●
Cello Electron’”’ Polish
●
Non-abrasive
●
Cooktop
Creme
●
Mesh
such
●
Hot
Water
●
Soap-Filled Scouring Pad
●
Scouring
●
Hot
Water
●
Soap-Filled Scouring
●
Scouring Ball
●
Dishwasher-Safe
●
Hot Soapy Water
●
Soap-Filled Scouring
●
Plastic Scouring
●
Dishwasher’-Safe
●
Hot Soapy Water
●
Scouring
●
Dishwasher-Safe
●
Hot Soapy
●
Soft Cloth
●
Plastic Scouring Ball
●
Soap
Water
GENERAL DIRECTIONS
DO NOT USE steel wool or
abrasives on the stainless
steel trim or brushed
chrome
of the module.
Clean the brushed chrome finish and the stainless steel
trim ring that surrounds the solid disk element by
following the directions below.
For light soil, wash and rinse with soapy water and then
polish with a dry cloth.
For heavy soil, sprinkle baking soda on soiled area. Cover
with a moist cloth or paper towel and allow to set for at
least minutes. Then wipe up the baking soda, rinse
with a damp cloth and polish with a dry cloth.
The solid disk element should be washed with a damp cloth and then dried. Finish by
wiping over lightly with cooking oil when cool. Clean very dirty solid disk elements
with a little cleaning powder or a scouring pad. The matte black surface can be
maintained by treating it periodically with the Cello
polish. It is available
from your Hotpoint supplier. To use the polish, use the applicator to apply a very thin
coating to the entire element surface. Turn the element on high for several minutes
to bake the polish to the element. When the element is cool, rub lightly with a cloth or
paper towel to remove any excess polish.
DO NOT USE abrasive
scouring pads or powders
on glass surface.
Wipe module clean after each use. Use an all-purpose,
non-abrasive cleaner. Do not use a dishcloth or sponge to
wipe up the module. They may leave a film of detergent
which can discolor your module when heated. If this
happens, remove the film with the recommended cleaner.
We recommend that you use paper towels or a clean cloth
which is used only for radiant module cleaning. For
burned-on
remove excess soil with a
edged razor blade scraper. Hold the blade at about a
angle to the module and
off the spot.
Wipe clean after each use. Make sure drain hole is not blocked. Use cotton swab or
toothpick to clean drain hole.
Let grill cool. Remove grill clement and lift out Retlector Plates. Retlector Plates may
be cleaned using one of the methods at left.
Can be cleaned in dishwasher.
Scoop out grease with large spoon. Set jars in pan of warm water to loosen
if
desired. Replace with
wide mouth canning jars. Do not use mayonnaise jars
which could break when hot grease drips into them.
DO NOT clean in self-
Can be
in dishwasher.
cleaning oven.
DO NOT use abrasive
cleaners. DO NOT wash in
dishwasher.
DO NOT USE steel wool,
Wash, rinse and then polish with a dry cloth.
abrasives, ammonia, acids
or commercial oven cleaners.
38