Installation Instructions
INSTALLING THE JUNCTION BOX
Install an approved junction box where it will be
easily reached through the front of the cabinet
where the cooktop will be located.
The cooktop
conduit is 58
″
long.
IMPORTANT:
The junction box must be
located where it will allow considerable slack in the
conduit for serviceability.
INSTALLATION OVER GSM2100 DISHWASHER
The center of the junction box should be 5
″
to 7
″
below the cooktop lip, so it does not interfere with
the dishwasher, installation or operation.
Electrical connections must be made before placing
the cooktop into the cutout.
1
INSTALLING THE COOKTOP
PROTECT SURFACE
OF COOKTOP
Place a towel or tablecloth onto the countertop.
Lay the cooktop upside down onto the protected
surface.
2
ATTACH FOAM TAPE
Apply the foam tape around the outer edge of the
glass.
Do not overlap the foam tape.
3
LOCATE MOUNTING PARTS
Start one screw through the bracket and into the
cooktop (both sides). Do not tighten. Turn the
bracket inward to avoid interference when
dropping the cooktop into the countertop.
4
Install junction box so
that it can be reached
through the front of the
cabinet.
*5
″
Min.
Bottom of Cooktop
Cloth under Cooktop
Bottom of Cooktop
Foam Tape
Cooktop
Glass
*7
″
Max. when
installing over
GSM2100
Dishwasher
17