
OPERATING THE SELF-CLEANING OVEN
(continued)
How to Set Oven for Cleaning
The self-clean
will automatically begin after
Quick Reminder:
“CLEAN” is displayed and the time for the clean
1. Prepare the oven for cleaning.
cycle is set. The words “ON” and “LOCK” will
2. Close the oven door completely.
appear in the display when the door automatically
locks. It will not be possible to open the oven door
3. Press the CLEAN pad.
until the temperature drops below the lock
4. Press the INCREASE or DECREASE pad
temperature and the LOCK light goes off.
until the desired Clean Time appears.
4. When the LOCK light is off, open the door.
NOTE:
If the oven is too hot and you start to set a clean
cycle, the word “OFF” will appear in the display.
Allow additional time for cooling before you try
to set the cycle.
1. F
O
11
OW
the directions to prepare the oven for
cleaning.
CLEAN
2. Press the CLEAN pad.
3. Press the INCREASE or
DECREASE pad until the
desired Clean Time is displayed.
Clean Time is normally 3 hours.
You can change the Clean Time to
anytime between 2 and 4 hours,
depending on the amount of soil
in your oven.
●
The word “door” will be displayed, the word
“LOCK” will flash and oven control will signal
if you set the clean cycle and forget to close the
oven door.
A fan mav automatically turn on and off to cool
internal parts. This is
and the fan may
continue to run even after the oven is turned off.
●
You can find out when the clean cycle
STOP
will be finished by pressing the STOP
TIME
TIME button.
To Stop a Clean Cycle
1. Press the
pad.
2. Wait until the oven has cooled below locking
CLEAR
temperature. You
not be able to open the
OFF
door right away unless the oven has cooled below
the locking temperature.
30