GE JGSP23, Руководство по установке

Страница: 15 / 38

a. Removing the top
grates, burner caps
b. Using a 7mm or 9/32" nut driver, remove the top
burner orifices. These may be accessed through
the burner air/gas mixer tube. (chimney)
NOTE: The orifices have a spring loaded
retaining ring around the hex head to hold the
orifice in the nut driver during installation and
removal. A slight amount of force is required
to push the nut driver down over the ring.
Installation Instructions
J
Making the L.P. Gas Conversion
Installing the L.P. Orifices
J5
BURNER
BOWL
SPARK IGNITER
BURNER GRATE
BURNER CAP
BURNER HEAD
MIXER TUBE
(CHIMNEY)
MIXER TUBE
MIXER TUBE (CHIMNEY)
RETAINER
RING
IMPORTANT: Save these orifices for
future conversion back to natural gas.
The L.P. orifices are shipped attached to the
riange on the area behind the storage drawer.
Remove storage drawer to see. Each orifice will
also show a series of engraved marks, (l,ll or lll),
located on tne top
Adjusting the Cooktop
Burners
J3
Locate the L.P.Orifices
J4
15
These marks denote the precise location of
each orifice to the cooktop burner.
I II III
Install the L..P. orifices in their precise locations
.
PORCELAIN COOKTOP
Front of Range
Return the natural orifices to the bracket and
reattach the bracket and these instructions to the
pressure regulator using the screw previously
removed.
GLASS COOKTOP
Front of Range
II
II
I
ll
II
II
I
lll