44
2.3 Installing the backguard (see features by model chart
at end of the manual).
1
2
1
2
2.4 Connecting the gas supply
DO NOT USE PLASTIC HOSES TO CONNECT THE GAS
SUPPLY AS THEY COULD LEAK, EVEN BRAIDED FLEXIBLE
STEEL HOSES.
Make sure your home has a gas pressure regulator that provides the correct
pressure.
Picture 1
Picture 2
Place the backguard behind the
cover and make sure that the
fireplace of the stove enters
through the “window” that brings
the backguard on the bottom.
Set the backguard using the two
head screws. The head screws
must enter through the lower
perforations of the back of the
backguard and must be screwed
against the cover.
Place the backguard on the back
of the cover and make sure that
the holes in both pieces match.
Set the backguard using two head
screws with its vise and screw.
One head screw and one vise with
screw on each side.
