QUESTIONS?
USE THIS PROBLEM SOLVER
(continued)
PROBLEM
SURFACE
NOT WORK
STRONG ODOR
OVEN WILL NOT
SELF-CLEAN
OVEN DOOR
NOT
OVEN NOT CLEAN
CLEAN CYCLE
APPEARS
ON DISPLAY
CONTROL BEEPS
OVEN
STOP
POSSIBLE CAUSE
*
bulb is loose defective, Adjust or replace.
●
Switch operating light is broken.
for service.
●
Improper
ratio
Adjust oven burner air shutters.
from the insulation
oven liner is normal for the first
times the oven is used. This is temporary.
●
Oven temperature is too high to set
operation. Allow the range to
cool to room
and reset the controls.
*Door
handle
way to the right.
●
Oven must
below
temperature clean cycle is complete. Do not
lock door with
latch except when using self-clean feature or the oven
may lock.
●
controls
set properly. Review Operating the Self-Cleaning Oven section.
Heavily soiled ovens
to hour
time.
●
Heavy
should be cleaned
before starting clean cycle.
●
Self-cleaning
has
latch
was not moved all the
way to the right. Move the latch handle.
●
was moved the right but a program other than self-cleaning was
selected. Move the latch
to
right
only when setting self-cleaning cycle.
●
This is reminding you to enter a bake temperature (see Baking section).
If you need more
toll free:
GE Answer Center
m
800.626.2000
consumer information service
50
