PROBLEM
“F”
AND A
FLASH
DISPLAY
OVEN
NOT WORK
TOP BURNERS DO NOT
OR DO NOT
BURN EVENLY
BURNERS HAVE YELLOW
OR
FLAMES
BURNER FLAMES VERY
LARGE OR YELLOW
OVEN DOES NOT
COOK PROPERLY
CLOCK
DO NOT WORK
OVEN LIGHT DOES NOT
COME
POSSIBLE CAUSE
●
If the time display flashed “F-” and a number,
have a
error code.
If function error code appears during the self-cleaning
check oven door
latch. The latch
may have been moved, even if only slightly, from the
latched position. Make sure the latch is moved the right as far as it will go.
Press the
pad. Allow oven to cool
one hour. Put oven back
into operation. If the failure code repeats, disconnect all power to the range.
for service.
●
Plug on range is not completely inserted in the electrical outlet.
●
The circuit breaker in your house has been tripped, or a fuse has been blown.
●
Oven controls not properly set.
Door left in locked position after cleaning.
●
Make sure electrical plug is plugged into a live power outlet.
●
Burner holes on the side or around
of burner may be clogged. Remove
burners (on models with dual burners) or burner heads (on models with sealed
burners) burner caps on spill-proof models, and clean them with a toothpick.
Make sure you do not enlarge the holes. On spill-proof models, check electrode
for burned-on food or grease.
(A) Yellow
(B) Yellow tips on
(C) Soft blue
Call for service
for
gas
Normal for natural gas
If burner
look like (A), call for service. Normal burner flames should look
like (B) or (C), depending on the type of gas you use.
●
With
some
tipping on outer cones is normal.
* range is connected to
gas, check all steps in the
Instructions.
●
Make sure thermostat capillary bulb (located in upper portion of oven) is in
correct position,
touching oven sides and not coated with anything.
●
Aluminum foil being used improperly in oven.
●
Incorrect cookware being used. Check each cooking section for cookware tips
or recommendations.
. Check common problems listed in Baking, Roasting and Broiling sections.
bottom not securely seated
in position.
●
Range electrical plug must be securely seated in a live power outlet.
Check for
blown fuse or tripped
breaker.
●
Review instructions in the Oven Control,
and Timer section.
●
Bulb may be loose or breed out.
●
Electrical plug must be plugged into alive power outlet.
(continued next
49