GE JGB910 and, Техническое обслуживание руководство

Страница: 13 / 30

– 11 –
Warming Drawer
The warming drawer will keep hot, cooked foods at
serving temperature. The warming drawer cannot be
used during a self-clean cycle. The ON signal light is
located above the control knob.
Remove Warming Drawer
1. Pull the drawer straight out until it stops.
2. Pull up on the left drawer tab while pushing down on
the right tab to release drawer stops.
3. Pull drawer straight out to remove.
NOTE: Electrical warming components are accessible
when the warming drawer is removed.
Replace Warming Drawer
1. Place the left drawer rail around the inner left rail
guide and slide and push it in slightly to hook it.
2. Place the right drawer rail around the inner right rail
guide and slide and push it in slightly to hook it.
3. Slide the drawer all the way in.
NOTE: To access the infinite switch for the warming
drawer, remove the lower control panel.
Pull the left rail release up.
Push the
right rail
release down.
GEA00165
Warming Drawer
Thermo Disc Warming Drawer
Thermo Disc
Warming Drawer
Heating Element
Warming Drawer
Heating Element
GEA00133