20
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
Before You Call For Service…
Troubleshooting Tips
Problem
Possible Causes
What To Do
Oven temperature too
Oven thermostat
•
See the
Adjust the oven thermostat—Do it yourself!
hot or too cold
needs adjustment.
section.
Oven will not work
A fuse in your home may
•
Replace the fuse or reset the circuit breaker.
be blown or the circuit
breaker tripped.
Oven controls improperly set.
•
See the
Using the oven
section.
“F— and a number
You have a function
•
Press the
Reset/Off
pad. Allow the oven to cool for
or letter” flash
error code.
one hour. Put the oven back into operation.
in the display
If the function code
•
Disconnect all power to the oven for at least 30
repeats.
seconds and then reconnect power. If the function
error code repeats, call for service.
Display goes blank
A fuse in your home may be
•
Replace the fuse or reset the circuit breaker.
blown or the circuit
breaker tripped.
The clock is in the
•
See the
Special features of your oven control
section.
black-out mode.
Display flashes
Power failure.
•
Reset the clock.
Unable to get the
Oven control pads were not
•
The
Bake
and
Broil Hi/Low
pads must be pressed at
display to show “SF”
pressed properly.
the same time and held for 3 seconds.
Power outage,
Power outage or surge.
•
Reset the clock. If the oven was in use, you must reset
clock flashes
it by pressing the
Reset/Off
pad, setting the clock
and resetting any cooking function.
Strong odor
An odor from the insulation
•
This is temporary.
around the inside of the
oven is normal for the first
few times the oven is used.
Fan noise
A cooling fan may
•
This is normal. The cooling fan will turn on to
automatically turn on.
cool internal parts. It may run for up to 2 hours
after the oven is turned off.
Содержание JCKS10
Страница 22: ...22 ...