GE JCK1000, Руководство по установке

Страница: 4 / 28

4
Cutout for 27”
(68.6 cm)
Single Built-In
Ovens only
)RU-&.-&.-&.PRGHOVRQO\
Cabinet Width 68.6 cm (27”)
Recommended
Cutout Location
from Floor 82.6 cm (32 1/2”)
Cutout Depth 59.7 cm
(23 1/2”) Min.
Cutout Width 63.5 cm
(25”) Min.
64.1 cm
(25 1/4”) Max.
Cutout Height 70.2 cm
(27 5/8”) Min.
71.4 cm
(28 1/8”) Max.
If the cabinet does not have a solid bottom, two
braces or runners must be installed level with
the bottom of the cutout to support the weight
of the oven. For single ovens, the runners and
braces must support 68 kg (150 lbs.).
Installation Instructions
45.7 cm (18”)
68.6 cm (27”)
61 cm
(24”)
5 cm x 10 cm (2” x 4”) or
equivalent runners level
with bottom of cutout
NOTE: If marks, blemishes or the cutout
opening are visible above the installed
oven, it may be necessary to add wood
shims under the runners and front trim
until the marks or opening are covered.
These ovens are not approved
for stackable installation.
NOTE: If the cabinet does not
have a front frame and the sides
are less than 1.9 cm (3/4”) thick,
shim both sides equally to establish
the cutout width.
A
Cabinet
Width
68.6 cm
(27”)
Junction box
recommended to
be in right side
adjacent cabinet
Recommended
cutout location from
ÀRRUFPµ
Allow a minimum
of 58.42 cm (23”) for
clearance to adjacent
corners, drawers, walls,
etc. when door is open
58.42 cm
(23”)
Allow 2.5 cm (1”) for
overlap of oven over
side edges of cutout
5 cm x 10 cm (2” x 4”)
or equivalent runners
level with bottom of
cutout
Cutout Width
63.5 cm
(25”) Min.
64.1 cm
(25 1/4”) Max.
Cutout
Height
70.2 cm (27 5/8”) Min.
71.4 cm (28 1/8”) Max.
Allow 2.5 cm
(1”) minimum
for overlap of
oven top and
bottom of cutout