background image

47

Safety Instructions

Operating Instructions

Safety Instructions

Operating Instructions

Care and Cleaning

Tr

oubleshooting T

ips

Consumer Support

All warranty service provided by our Factory Service Centers,
or an authorized Customer Care

®

technician. To schedule

service, 24 hours a day, call 1-800-361-3400.

For The Period Of:

GE Will Provide:

One Year

Any part 

of the range which fails due to a defect in materials or workmanship. During this

From the date of the

full one-year warranty, 

GE will also provide, 

free of charge, 

all labor and in-home service to

original purchase

replace the defective part.

Five Years

A replacement glass cooktop 

if it should crack due to thermal shock, discolor, crack at the

From the date of the

rubber seal between the glass cooktop and the porcelain edge, or if the pattern wears off.

original purchase

A replacement radiant surface unit 

if it should burn out. 

During this 

limited additional four-year warranty, 

you will be responsible for any labor or 

in-home service.

Service trips to your home to teach you how to use 
the product.

Improper installation, delivery or maintenance.

Failure of the product if it is abused, misused, 
or used for other than the intended purpose or 
used commercially.

Damage to the glass cooktop caused by use of cleaners
other than the recommended cleaning creams and
pads.

Damage to the glass cooktop caused by hardened 
spills of sugary materials or melted plastic that 
are not cleaned according to the directions in 
the Owner’s Manual.

Replacement of house fuses or resetting of circuit
breakers.

Damage to the product caused by accident, fire, floods
or acts of God.

Incidental or consequential damage caused by possible
defects with this appliance.

Damage caused after delivery.

What GE Will Not Cover:

This warranty is extended to the original purchaser and any succeeding owner for products purchased for
home use within Canada. In home warranty service will be provided in areas where it is available and deemed
reasonable by Camco to provide.

Warrantor: Camco, Inc.

Burlington, Ontario

Staple your receipt here. 

Proof of the original purchase

date is needed to obtain service

under the warranty.

GE Electric Range Warranty.

Содержание JCB905

















































Отзывы: