GE IP180 Series, Руководство по установке

Страница: 4 / 4

IND045-121712
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
Specifications
Input Voltage 120 – 277V
Input Power (complete system)/8 ft. 80W
Input Frequency 50/60Hz
Power Factor >0.9
THD <20%
Control 0-10V/DALI
Warranty 5 year limited warranty
Dimensions 1 ft. x 8 ft. x 5 in.
Environmental Operating Temperature Range -10°C to +25°C
Environmental Humidity (non-condensing) 20 to 80% Non-condensing, dry location rated
Environmental Storage Temperature Range -40°C to +60°C
Weight/8 ft. <35 lbs.
Environmental Rating Dry Location
Troubleshooting
Conforms to the following standards:
Symptom Solution
Luminaires will not turn on • Check that the color of the supply side wires match the color of the wires they are connected to.
• Check that the LED driver connector is fully engaged to the LED light engine connector.
• Check that the LED light engines are connected at the juction between the two luminaires.
Luminaire on through wiring will
not turn on
• Check that the through wiring connector from the previous fixture in the linear row is fully
engaged to the malfunctioning luminaire.
Joiner bracket will not fit
between two luminaires in a
continuous row
• Check that the mating tabs between the luminaires are fully engaged.
• Check that the two luminaires are on the same level with one another and there is no angle
between them.
Joiner covers will not click
together
• Check that the joiner covers are a slot and tab pair not two slotted or two tabbed pieces.
• Check that the internal wiring is not in the way of the joiner covers.
Suspension method won’t
engage with luminaire
• Check that the suspension method is one of the approved types in the installation instruction.