GE Interlogix KTC-115CC Скачать руководство пользователя страница 13

KTC Compact Cameras 

Making Additional Adjustments 

 

 

1040206A / December 2002 

13 

W

ARRANTY AND 

R

ETURN 

I

NFORMATION

 

GE Interlogix, Kalatel division, warrants its equipment for three years 
from the date of purchase. This warranty covers defects in materials and 
workmanship only; equipment failures that are due to improper 
installation, modification, abuse, or acts of nature are not covered by this 
warranty. The repair department will evaluate all equipment returned for 
repair to determine warranty coverage. The Tech Support Manager will 
resolve any questions that may arise during evaluation to make a final 
determination. 

Note: The three-year warranty does not apply to the following products: 

MobileView

®

 and the monitor CRT, which carry a 12-month warranty from the date of 

purchase. 

For all warranty repairs, GE Interlogix, Kalatel division, will cover all 
costs, including parts, labor, and shipping. Repaired equipment will be 
returned via the same method of shipment in which it was received. If a 
customer requests a faster return shipment, the difference will be 
charged. 

For all non-warranty repairs, the customer will be billed for parts, labor, 
and shipping. Labor will be billed in half-hour increments.  

Note: Customers requesting an estimate prior to repair will be notified by phone. If they 
cannot be reached, they will be notified by fax. If we are unable to reach the contact person 
for repair authorization after one phone attempt and two fax attempts, the equipment will be 
returned without being repaired. We will hold equipment no longer than two weeks. 

A

DVANCE 

R

EPLACEMENT 

P

OLICY

 

When an advance replacement is required, we will send the customer 
replacement equipment from our stock and receive the returned product 
in exchange. The received equipment will be evaluated and the repair 
department will determine whether it is a warranty replacement. If it is 
non-warranty, see our repair policy above for details. The following 
guidelines will be used for all advance replacements: 

• 

Fewer than 45 days from purchase, GE Interlogix, Kalatel division, 
will replace the product with new equipment. 

• 

From 45 days to 1 year from purchase, GE Interlogix, Kalatel 
division, will replace the product with refurbished equipment. 

• 

From 1 year to 3 years from purchase, the product must be sent in 
for repair. Advance replacements will be sent for a fee of $100. 

If you have questions about this policy, please contact Kalatel’s RMA 
department at 800-469-1676.

Содержание Interlogix KTC-115CC















Отзывы: