GE Interlogix KTC-115CC, Руководство пользователя, Страница: 10 / 14

Making Cable Connections KTC Compact Cameras
10 1040206A / December 2002
5 M
AKING
C
ABLE
C
ONNECTIONS
To connect the video and power cables, see Figure 6 and perform the
following.
1) Attach the monitor’s video in BNC connector to the camera’s
VIDEO OUT connector.
2) With a screwdriver, loosen the ~AC24V terminal connectors on the
terminal block.
3) Connect the leads of the power source to the ~AC24V terminal
connectors.
4) Tighten the terminal connector screws until snug, ensuring that the
power leads are secure.
5) Provide power to the camera.
Note: The power LED should be illuminated once power is supplied to the camera. If the
power LED is not illuminated, check the terminal block connections and power source.
24 VAC
power
source
Power
LED
To monitor
Figure 6. Power and video connections