27
Installation Instructions
PLUG IN THE ICEMAKER
Holding the icemaker in place, insert the
icemaker
power cord plug
into the socket on the rear wall,
making sure the prongs and holes are matched.
Press the plug firmly into the socket. Lock the plug
in place by clipping the restraints onto each side of
the plug. Make sure the restraints click into place.
Make sure the power cord is still in the hook on the
back of the icemaker.
5
MOUNT THE ICEMAKER
•
Lift the icemaker so the
fill tube
(13) fits in the
fill cup opening
(E). Hang the
icemaker
on the
two
mounting screws
(C).
Make sure:
•
The power cord is still firmly in the socket.
•
The
fill tube
(13) extends into the fill cup
opening on the back of the icemaker. (Check
the rear of the refrigerator to make sure the
fill tube has not been pushed out of the back
of the refrigerator).
•
The icemaker mounting screws are located in
the uppermost position of the mounting slots.
•
The icemaker is level.
THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
6
13
E
C
INSTALL THE ICE BUCKET
Put the
ice bucket
(9) under the icemaker.
Make sure the icemaker power switch is set to
O
(off).
7
ATTACH WARRANTY LABEL
A
label
(7) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
8
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner’s Manual.
The icemaker installation inside the freezer is now
complete. Continue to the
Water Valve Assembly
section.
9
INSTALL THE ICEMAKER FILL CUP
Install the
icemaker fill cup
(side-mounted) (15)
into the icemaker as shown.
4
15
9
Hook
