GE HC HP, Руководство пользователя

Страница: 62 / 114

2-20 MDS Intrepid-HC HP Installation and Operation
Additional Setup Using the NMS
After you perform initial setup via the terminal, some additional procedures should be performed via the NMS
software.
Note: The information in this section is provided only for basic initial setup. More detailed information about the
NMS is provided in the NMS User Guide .
Connecting to the Ethernet Port
1. Connect a crossed Ethernet cable from your PC to the Ethernet Port. If the connection is to a LAN (wall
connection), use the standard Ethernet cable.
2. Make sure the IP address on your PC is on the same sub-net as the one you defined for the IDU (in most cases,
the first three numbers of the IP address must be identical, depending on the sub-net mask).
NMS PC Requirements
Before you install the NMS software, verify that your PC has the following minimum requirements:
For Windows
Processor: Pentium 4, 2.8 GHz (minimum)
Memory (RAM): 256 MB minimum
Operating System: Windows 2000 or above
Serial Port: RS-232 (Hyper-Terminal)
For UNIX
Processor: Blade 100 Ultra 5 (minimum)
Memory (RAM): 256 MB minimum
Operating System: Solaris 8 or 10
Installing the Network Management Software (NMS)
Note: More detailed information about NMS installation is provided in the NMS User Guide .
1. Insert the NMS CD in the CD drive.
2. In Windows Explorer, double-click the setup.exe file.
The installation program begins.
3. Follow the instructions displayed.