21
Installation Instructions
IN
ST
AL
AT
IO
N I
NS
TR
UC
TIO
NS
MAKE TUBING CONNECTIONS (Cont.)
collet fitting on the Remineralization/Antimicrobial
Filter.
3. Cut tube square and to length.
4. Insert all the way into the fitting.
5. Pull on the tube to be sure it is held firmly in the
fitting.
BLUE TUBE
from Remineralization/Antimicrobial Filter to
Reverse Osmosis assembly
1. Locate the 3/8” blue tube from the parts bag and
cut one end square.
2. Insert this end all the way into the INLET collet
fitting on the Remineralization/Antimicrobial
Filter.
3. Pull on the tube to be sure it is held firmly in the
fitting.
4. Route the other end of this tube to the blue
collet fitting on the Reverse Osmosis assembly.
5. Cut tube square and to length.
6. Insert all the way into the fitting.
7. Pull on the tube to be sure it is held firmly in the
fitting.
BLACK TUBE
from Reverse Osmosis faucet to
drain adapter
1. Locate the 3/8" black tube attached to the faucet.
2. The loose end needs to be attached to the quick
connect fitting on the sink drain adapter.
3. Cut this tube as needed to route it as straight as
possible, without loops, dips, or kinks.
4. Cut the end of the tube square.
5. Insert all the way into the fitting.
6. Pull on the tube to be sure it is held firmly in the
fitting.
RED TUBE
from Reverse Osmosis faucet to
Reverse Osmosis assembly
1. Locate the 1/4” red tube attached to the faucet.
2. Route the loose end of this tube to the red collet
fitting on the Reverse Osmosis assembly.
3. Cut tube square and to length.
4. Insert all the way into the fitting.
5. Pull on the tube to be sure it is held firmly in the
fitting.
RO Product
Water Faucet
Drain
Adapter
Sink
P–Trap
HOT COLD
Water Supply
Fitting
3/8” Black
Tube
1/4” Red
Tube
3/8” Blue
Tubes
3/8” Yellow
Tube
1/4” Green
Tube
Tank
Connector
Storage Tank
Reverse Osmosis Assembly
Green Collet
Blue Collet
Yellow Collet
Red Collet
Remineralization/
Antimicrobial
Filter
INLET
OUTLET
