Installation Instructions
Tilt the dryer sideways and remove the foam
shipping pads by pulling at the sides and breaking
them away from the dryer legs. Be sure to remove all
of the foam pieces around the legs.
UNPACKING YOUR DRYER
STEAM WATER HOSES:
GE strongly recommends the use of factory specified parts.
These hoses are manufactured and tested to meet GE
specifications.
GE strongly recommends the use of new water supply hoses.
Hoses degrade over time and need to be replaced every 5
years to reduce the risk of hose failures and water damage.
Parts and Accessories
Order on-line at
GEAppliance.ca
, 24 hours a day or
by phone at
800.661.1616
during normal business hours.
Part Number
Accessory
WE25X20060
Complete Kit (hoses, Y-adapter
washers) (included)
OR
WE1M847
Long Hose and
WE01X22395
Short Hose
PM14X10056
Dryer door opening vent brush
(not included)
WX14X10007
LintEater™ Dryer rotary tube brush
(not included)
2
ROUGH-IN
DIMENSIONS
State of California Proposition 65 Warnings:
The California Safe Drinking Water and Toxic Enforcement Act requires the governor of California to publish a list of substances
known to the state to cause cancer, birth defects or other reproductive harm and requires businesses to warn of potential exposure
to such substances.
WARNING
This product contains one or more chemicals known to the State of California to cause cancer, birth defects or
other reproductive harm.
Gas appliances can cause low-level exposure to some of these substances, including benzene, carbon monoxide, formaldehyde and
soot, caused primarily by the incomplete combustion of natural gas or LP fuels. Exposure to these substances can be minimized by
properly venting the dryer to the outdoors.
4 5/8”
(11.7 cm)
Y
X
27”
(68.8 cm)
X
4 1/4”
(10.8 cm)
Side View
Front View
Cubic
Foot
X
Y
6.0
43 3/8”
(110 cm)
26 3/4”
(68 cm)
7.0
43 3/8”
(110 cm)
29 1/2”
(75 cm)
7.3
43 3/4”
(111 cm)
30 1/2”
(78 cm)
