HOW TO INSTALL
10
TROUBLE-SHOOTING
9
When out of used for a long time
■
Remove the power supply cord.
■
Dry your refrigerator, opening the door for 2-3 days.
When you get ready to move
■
Securely fasten removable interior parts (or move and package them
s e p a r a t e l y ) .
■
Do not lay your refrigerator horizontally, or compressor may be damaged.
If refrigerator is not operating:
■
Is the power supply cord unplugged?
■
Is home fuse blown or circuit breaker off ?
If refrigerator is warmer than usual:
■
Has the door been open frequently or for a long period?
■
If refrigerator overcrowded preventing good air circulation?
■
Is the hot thing stored without cooling?
■
Is the clearance between side and rear plate of the refrigerator and the wall
allowed suff i c i e n t l y ?
If these are unusual sounds:
■
Is refrigerator placed on the level?
■
Are foreign objects behind the refrigerator?
■
Are dishes on refrigerator shelves vibrating?
If so, rearrange the dishes.
Before you calling for service check a few things as below for yourself first.
Location
Install refrigerator in a convenient location away from extreme heat and
cold. Allow sufficient clearance about 15cm between the refrigerator
and rear wall so it is easy for refrigerator to radiate heat.
Leveling
Level refrigerator so it rests solidly on the floor without rocking.
Make sure all packing material is removed. If the shipping tape has left a
residue on the door, clean it with isopropyl alcohol (most rubbing alcohol is
this type).
If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent or a simmilary qualified person in order to avoid a hazard.
■
The electrical plug must be accessible without moving the set.
■
Changing the internal light bulb.
Disconnect the refrigerator from the main supply by removing the plug.
Replace the bulb with one of the correct type and size (15Watt SES
E14 Base).
