Customer Service
Troubleshooting T
ips
Operating Instructions
Safety Information
Problem
Possible Causes
What To Do
Dish fading
Decoration which is
•
Consult with dishware
applied to a glazed
manufacturer.
surface is most
susceptible
Rust deposits
Iron deposits in
•
Install an iron filter in the water
water supply
supply line.
Spots and filming
•
Use
Jet-Dry
®
rinse agent to
on glasses and
remove spots and prevent new
flatware
film build-up.
•
To remove stubborn spots and
pre-existing film from glassware:
1
Remove all metal utensils
from the dishwasher.
2
Do not add detergent.
3
Select the longest cycle.
4
Start the dishwasher and allow
to run for 18 to 22 minutes.
Dishwasher will now be in the
main wash.
5
Open the door and pour 2 cups
(500 ml) of white vinegar into
the bottom of the dishwasher.
6
Close the door and allow to
complete the cycle. If vinegar
rinse doesn’t work: Repeat as
above, except use 1/4 cup
(60 ml) of citric acid crystals
instead of vinegar.
Cloudiness on
Combination of soft
•
This is called
etching
and is
glassware
water and too much
permanent. To prevent this from
detergent
happening, use less detergent
if you have soft water. Wash
glassware in the shortest cycle that
will get them clean.
Water temperature
•
Lower the water heater
entering the dishwasher
temperature.
exceeds 150°F.
Black or gray
Aluminum utensils have
•
Remove marks with a mild,
marks on dishes
rubbed against dishes
abrasive cleaner.
•
Load items so that they do
not touch.
Extremely hard water
Low inlet water
temperature
Overloading the
dishwasher
Improper loading
Old or damp powder
detergent
Rinse agent dispenser
empty
Too little detergent
19
