Customer Service
Troubleshooting T
ips
Operating Instructions
Safety Information
Problem
Possible Causes
What To Do
Dishwasher won’t run
Fuse is blown, or the
•
Replace fuse or reset
circuit breaker tripped
circuit breaker. Remove
any other appliances from
the circuit.
Door not latched
•
Close the door and push it
in to relatch.
Dial
NOT
set
•
Turn the Dial to the
exactly at desired
desired wash cycle.
wash cycle
Dishwasher leaks
Improper installation
•
Review Installation
Instructions and install
properly.
Correct detergent
•
Use only automatic
wasn’t used
dishwasher detergents.
Cascade® Automatic
Dishwashing Detergent
has been approved for use
in all GE dishwashers.
Suds in the tub
Correct detergent
•
Use only automatic
wasn’t used
dishwasher detergents to
avoid sudsing. Cascade®
Automatic Dishwashing
Detergent has been
approved for use in all
GE dishwashers.
•
To remove suds from the
tub, open the dishwasher
and let suds evaporate.
Add 1 gallon of cold water
to the tub. Close and latch
the dishwasher. Pump out
water by slowly turning the
Dial until a drain period
is reached. Repeat if
necessary.
Rinse agent
•
Always wipe up rinse agent
was spilled
spills immediately.
Before you call for service…
Troubleshooting Tips
Review the charts on the following pages first and you may not
need to call for service.
17