GE GSD6000 Series Скачать руководство пользователя страница 4

Страница: 4 / 12

Installation Preparation

PREPARE ELECTRICAL WIRING

#282 French

FOR PERSONAL SAFETY:

Remove house fuse or open circuit breaker

before beginning installation. Do not use

an extension cord or adapter plug with

this appliance.

#282 French

The improper connection of the equipment

grounding conductor can result in a risk

of electric shock. Check with a qualified

electrician or service representative if you

are in doubt that the appliance is properly

grounded.

For models equipped with power cord:

Do not modify the plug

provided with the appliance; if it will not fit the outlet, have a
proper outlet installed by a qualified technician.

Cabinet Preparation and Wire Routing

• The wiring may enter the opening from either side, rear or the

ﬂ oor within the shaded area.

• Cut a 1-1/2" maximum diameter hole to admit the electrical

cable. Cable direct connections may pass through the same
hole as the drain hose and hot water line, if convenient. If
cabinet wall is metal, the hole edge must be covered with
a bushing.

Note:

Power cords with plug must pass through a separate

hole.

Electrical Connection to Dishwasher

Electrical connection is on the right front of dishwasher.
• For cable direct connections the cable must be routed as

shown in Figure E. Cable must extend a minimum of 24" from
the rear wall.

• For power cord connections, install a 3-prong grounding type

receptacle in the sink cabinet rear wall, 6" min. or 18" max.
from the opening, 6" to 18" above the ﬂ oor.

Figure E

WARNING

Electrical Requirements

• This appliance must be supplied with 120V, 60Hz., and

connected to an individual properly grounded branch circuit,
protected by a 15 or 20 ampere circuit breaker or time delay
fuse.

• Wiring must be 2 wire with ground and rated for 75°C (176°F).
• If the electrical supply does not meet the above

requirements, call a licensed electrician before proceeding.

Grounding Instructions–Cable Direct

This appliance must be connected to a grounded metal,
permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors and be
connected to the equipment grounding terminal or lead on the
appliance.

Grounding Instructions–Power Cord Models

This appliance must be grounded. In the event of a malfunction
or breakdown, grounding will reduce the risk of electric shock
by providing a path of least resistance for electric current.
This appliance is equipped with a cord having an equipment
grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet that is installed and
grounded in accordance with all local codes and ordinances.

��