How to operate your dishwasher
II
I
I
HEATED ENERGY
SAVER
●
■
HOLO
STEP 1. Load your dishwasher
with dishes, silverware, pots,
pans, bowls, etc. according
instructions on pages 8 and 9.
STEP 2. Add detergent to the
detergent dispenser. Make sure the
Cycle Indicator Dial is at OFF
position before adding detergent.
(See pages 6 and 7.)
Use rinse aid agent to help prevent
spotting. Occasionally check to
make sure the rinse agent container
is at least half full. (See page 6.)
STEP 3. Select HEATED DRY.
STEP 4. Select the cycle and start
dishwasher. (See Cycle Selection
Hints on next page.)
your dishwasher drains into a
food waste disposer, operate the
disposer until it is empty before
starting the dishwasher.
●
For POTSCRUBBER and
NORMAL WASH cycles:
POT-
NORMAL
SCRUBBER WASH
m
●
For LIGHT WASH cycle:
a. Be sure door is unlatched.
b. Push NORMAL WASH button.
. LIGHT WASH
●
WASHING
■
c.
turn Cycle Indicator Dial
to LIGHT WASH position.
d. Latch door to start the cycle.
●
For RINSE & HOLD cycle:
HEATED DRY. Turns the drying
heater on
fast drying.
ENERGY SAVER (no heat boost).
Turns the drying heater off to save
energy. Dishes
dry naturally
a. Be sure door is unlatched.
a. Push selected
button.
b. Select ENERGY SAVER drying
b. Latch the door.
●
LIGHT WASH
WASHING
●
●
RINSE &HOLD
option
o&F
. LIGHT WASH
DRYING
●
WASHING
■
RINSE &HOLO
Slowly turn Cycle Indicator Dial
over a longer period such as
c. Slowly turn Cycle Indicator Dial
to ON position to start the cycle.
overnight.
You will hear the motor start.
to RINSE & HOLD position.
If
need
dishes sooner.
There is a time delay between
d. Latch door to start the cycle.
the dishwasher door after’ the
start-up and water
so you
cycle is complete to reduce the
will not hear any wash action
natural drying time.
right away.
Use of this option reduces the
To obtain the benefits of a complete
electrical energy used by this
cycle, be careful that you do not
approximately
for the
turn the dial any further than
NORMAL WASH cycle.
necessary to start the dishwasher.
4
