GE GSC870M, Инструкция по использованию и уходу, Страница: 4 / 20

How to operate your dishwasher
I
●
STEP 1. your dishwasher
with dishes, silverware, pots,
pans, bowls, etc., according to
instructions on pages 8-IO.
STEP 2. Add detergent to the
detergent dispenser. Make sure the
Cycle Indicator Dial is at OFF
position before adding detergent.
(See pages 6 and 7.)
Use rinse aid agent to help prevent
spotting. Occasionally check to
insure that rinse agent container is
at least half full. (See page 6.)
STEP 3. Select drying option.
DRYING HEAT
OFF
DRYING HEAT ON. Turns the
drying heater on for fast drying.
HEAT OFF. Turns the
drying heater off to save energy.
Dishes will dry naturally over a
longer period such as overnight.
If you need your dishes sooner,
open the dishwasher door after the
cycle is complete to reduce the
natural drying time.
STEP 4. WASH HEAT BOOST
Option.
WASH HEAT BOOST
OFF
When selected, the wash cycle will
be extended for 8 minutes while
the dishwasher heats the water for
good washing and drying. The
entering water must be at least
When this option is not selected
the entering water must be at least
To test water temperature,
see page 6.
STEP S. Select the wash cycle and
start the dishwasher. (See Cycle
Selection Hints on next page.)
If your dishwasher drains into a
food waste disposer, operate the
disposer until it is empty before
starting the dishwasher.
●
When NOT using DELAY
START (for all cycles):
a. Be sure door is unlatched.
b. Push selected cycle button.
I
RINSING
c. Slowly turn Cycle Indicator
Dial to
START.
4
d. Latch the door to start the
dishwasher. There is a delay
between start-up and water fill
so you will not hear any wash
action right away.
●
When using DELAY START
(for all cycles):
Note: START can be delayed
automatically for up to 6 hours.
a. Be sure door is unlatched.
b. Push selected cycle button.
c.
d.
Slowly turn Cycle Indicator
Dial to desired delay time.
Latch door to start timer.
Dishwasher
start automatically
at end of selected delay time.