GE GSC870M, Инструкция по использованию и уходу, Страница: 13 / 20

How to use the Unicouple
Before operating your
dishwasher the first time...
Attach the Aerator Faucet
Adapter. The special aerator faucet
adapter supplied with your
dishwasher must be assembled
the sink faucet before
can use
your dishwasher.
The faucet adapter is designed to
standard spouts having internal
external threads. You will find
the adapter and two washers in the
“Hardware for Installation” packet
in your dishwasher.
To install faucet adapter, first
remove the old aerator or trim ring
on your faucet spout.
If faucet has external threads:
Insert the thinner of the two
washers into the faucet adapter and
attach it to the faucet spout.
If faucet has internal threads:
Insert both washers into the
adapter and attach it to the faucet
spout.
If the faucet adapter threads do
not match your faucet spout,
your local hardware or plumbing
store normally has
additional fittings adapt your
faucet spout to the special aerator
faucet adapter.
How
to connect the
Unicouple
1. Unicouple and its hoses
from storage compartment located
at rear of dishwasher and attach it
to the faucet adapter.
2. Attach the Unicouple connector
to the faucet adapter by depressing
collar at the top of the connector.
When Unicouple is all the way up
onto the adapter, release the collar.
It will then snap into position to
lock the Unicouple in place.
The small hose carries
water from the faucet to the
dishwasher. Its large hose carries
drain water to the sink. Be sure
drain hose is pointing toward the
sink bowl drain opening and the
sink drain is open
water that
will drain from your dishwasher. If
your dishwasher drains into a
disposer, operate the disposer until
it is completely empty before
starting the dishwasher.
to use the
nozzle
SE
●
It allows you to flush cold water
out of the hot water line so that
you
better regulate your water
temperature.
●
allows you to test the
temperature of the water before
starting your dishwasher.
If you need fresh water for
personal use:
Disconnect the Unicouple.
●
Draw your fresh water directly
from your faucet.
●
Do not disconnect the Unicouple
while the dishwasher is operating.
How to
disconnect the
Unicouple from faucet
adapter
1. Turn the hot water.
2. Release the water pressure by
depressing the pressure release
lever. This relieves water pressure
and protects you, and the room,
from severe splashing.
3. Shake excess water out of
Unicouple and return it and its
hoses to the dishwasher storage
compartment.
NOTE: When motor stops at the
end of the final rinse, the Unicouple
can be disconnected and returned to
storage.
The nozzle is part of the
Unicouple connector. Operate the
by depressing the pressure
release lever on the side of the
Unicouple connector. You will find
the
nozzle useful for
several reasons. For example:
13