12
49-60769 Rev. 3
8.
Remove the screw hole covers on the left side of
the middle mullion where the new hinge will be
installed. Place the screw hole covers over the
holes where you removed the old hinge.
9.
,QVWDOOWKHQHZOHIWERWWRPKLQJHWKDWFDPHZLWK
the unit into left side of the middle mullion. Place
the door to new installed left bottom hinge.
10.
Remove the top hinge from the door. Set aside the
right top and bottom hinges. Retain for returning door
swing to original configuration.
11.
8QVFUHZWKHGRRUVWRSIURPERWWRPULJKWVLGHRIWKH
door. Move the door stop to the bottom left side of the
door. Line the door stop with locating pin, screw hole,
and hinge pin hole at the bottom left side of door. Secure
the stopper tightly using screw provided.
12.
,QVWDOOWKHWRSOHIW
hinge that came
with the unit into the
hinge hole on the
top left of the door.
13.
8VLQJWKHVFUHZV
provided, attach the
top left hinge to the
top of the case.
14.
Connect the wire and
redress wire around
the hinge cover, top
case and top of the door.
15.
Place the new hinge cover on top of the hinge.
16.
Turn the top door cap around and replace cap
with the opening over the hinge cover. Press into
place.
17.
Pull down to remove the square insert on the left
side of the front case cover. Slide this insert into
the opening on the right side where the hinge
cover was.
18.
Replace the front case cover using the screws
removed earlier. There are clips on the inside of
the case cover that fit into notches on the case.
19.
,QVWDOOWKHFRYHULQVHUWXQGHUWKHKLQJHFRYHU
Installation Instructions
REVERSING THE DOOR SWING (CONT.)
INSTALLATION INSTRUCTIONS
Hinge Cover
Case
Cover
Screws
Notches in case
Clips
&RYHU,QVHUW
Bottom
Hinge
Screws
'RRU6WRSV
Locating
Collar
Screws
Bottom Right
6LGHRI'RRU
Bottom Left
6LGHRI'RRU
WARNING
)ROORZDOOVWHSVZKHQUHYHUVLQJ
WKHGRRUVZLQJ)DLOXUHWRIROORZWKHVHLQVWUXFWLRQV
leaving off parts, or overtightening screws, can lead
to the door falling off and result in injury and property
damage.
